Перейти к основному содержанию

Возврат к шагу #1

Отредактированно Julian Shovlin -

Правка отклонена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mm 5-point Pentalobe screws
-[* black] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].
+[* black] hf34iofrn34oifn3p4fm34