Перейти к основному содержанию

Changes to Step #1

Edit by ifix

Правка одобрена автор Sam Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mm 5-point Pentalobe screws
[* black] The special screwdriver needed to remove the eightten 5-point Pentalobe screws can be found [product|IF145-090|here].
[* black] The special screwdriver needed to remove the eightten 5-point Pentalobe screws can be found [product|IF145-090|here].