Changes to Step #1
Edit by Sam Goldheart —
Правка одобрена автор Sam Goldheart
- Удален
- Добавлено
- Без изменений
Шаг Линий
[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down. |
[* black] Remove the following ten screws: |
[* red] Two 9 mm [* orange] Eight 2.6 mm |
[* red] Two 9 mm [* orange] Eight 2.6 mm |
[* black] The special screwdriver needed to remove the ten 5-point Pentalobe screws can be found [product|IF145-090|here]. |