Перейти к основному содержанию

Возврат к шагу #1

Отредактированно Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.
-[* black] Remove the following ten screws:
- [* red] Two 9 mm P5 Pentalobe screws
- [* orange] Eight 2.6 mm P5 Pentalobe screws
-[* black] The special screwdriver needed to remove the ten 5-point Pentalobe screws can be found [product|IF145-090|here].
+[* icon_note] Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.
+[* black] Use a [product|IF145-090|P5 Pentalobe] driver to remove ten screws securing the lower case, of the following lengths:
+ [* red] Two 9 mm screws
+ [* orange] Eight 2.6 mm screws