Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью gentry -

Правка отклонена автор Walter Galan

Без изменений

Шаг Линий

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* icon_note] Hold the antenna cables out of the way as you lift the heat sink end of the logic board out of the upper case.
+[* black] When disassembling, keep the rubber gasket in position on the heatsink, or, when reassembling, replace the lower arms of the rubber gasket in position beneath the heatsink before seating the board