Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

-[* black] If the heat sink seems to be stuck to the logic board after removing all four screws, use a spudger to carefully separate the heat sink from the faces of the CPU and GPU.
+[* icon_note] If the heat sink seems to be stuck to the logic board after removing all four screws, use a spudger to carefully separate the heat sink from the faces of the CPU and GPU.
[* black] Remove the heat sink from the logic board.
[* icon_caution] When reinstalling the heat sink, be sure to apply a new layer of [product|IF179-010|thermal paste]. If you have never applied thermal paste before, we have a [guide|744|guide] that makes it easy.