Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Правка одобрена by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Lift the fan out of the mini for enough clearance to access its connector.
[* black] Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board. Alternatively, slide a spudger underneath the wires and pry up to disengage the connector.
[* icon_caution] Do '''not''' pry at the socket, or you willmay rip it from the logic board.
[* black] Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board. Alternatively, slide a spudger underneath the wires and pry up to disengage the connector.
[* icon_caution] Do '''not''' pry at the socket, or you willmay rip it from the logic board.
[* black] Remove the fan.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added