Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Правка одобрена by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Lift the fan out of the mini for enough clearance to access its connector.
[* black] UseGrab all the wires at once and gently pull to disconnect the fan from the logic board. Alternatively, slide a Spudgerspudger underneath the wires and pry up to carefullydisengage the connector.
[* icon_caution] Do '''not'''
pry at the fan cable connector UP out of its socket onsocket, or you will rip it from the logic board.
[* black] UseGrab all the wires at once and gently pull to disconnect the fan from the logic board. Alternatively, slide a Spudgerspudger underneath the wires and pry up to carefullydisengage the connector.
[* icon_caution] Do '''not'''
pry at the fan cable connector UP out of its socket onsocket, or you will rip it from the logic board.
[* black] Remove the fan.