Перейти к основному содержанию

Changes to Step #3

Edit by nh3

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Lift the fan out of the mini for enough clearance to access its connector.
[* black] Carefully pull the fan cables upward to lift the fan connector up out of its socket on the logic board.
[* icon_caution] This type of connector looks a lot like it needs to be moved towards the ''side'' to remove it, but it does actually come off only if you pull it '''upwards'''. I nearly broke a connector like this while figuring that out.
[* black] Remove the fan.