Перейти к основному содержанию

Изменения к шагу №2

Отредактированно nh3 -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use the tip of a spudger to lift the IR sensor connector up and out of its socket on the logic board.
[* icon_caution] This type of connector looks a lot like it needs to be moved towards the ''side'' to remove it, but it does actually come off only if you pull it '''upwards'''. I nearly broke a connector like this while figuring that out.