Перейти к основному содержанию

Изменения к шагу №3

Отредактированно pete -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Remove the following three screws:
[* red] One 5.0 mm T8 Torx or 2.0 mm Hex screw (either screwdriver will work)
[* orange] One 16.2 mm T6 Torx screw
[* yellow] One 26 mm T6 Torx standoff (this screw was removed with the fan)
[* yellow] One 26 mm T6 Torx standoff (this screw was removed with the fan)