Перейти к основному содержанию

Изменения к шагу №4

Отредактированно Arthur Shi -

Правка одобрена автор Arthur Shi

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Minimini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
[* red] Insert the [product|IF145-159|Mac Minimini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Minimini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
[* red] Insert the [product|IF145-159|Mac Minimini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
[* icon_note] Cease prying when the I/O board is visibly separated from the outer case.
[* black] Remove the Mac Minimini Logic Board Removal tool.
[* black] Remove the Mac Minimini Logic Board Removal tool.