Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* icon_note] Lift the display up enough to have easy access to the connector, but not so much that you stretch the cables and stress their connections (about 8").
-[* black] While holding the display up with one hand, use a pair of tweezers to flip up the metal retaining bracket on the display data cable.
+[* black] While holding the display up with one hand, flip up the metal retaining bracket on the display data cable.
[* black] Carefully pull the display data cable from its socket on the logic board.
-[* icon_caution] Be sure to pull the display data cable connector straight out of its socket.
+ [* icon_caution] Be sure to pull the display data cable connector straight out of its socket.