Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #9

Редактировать с помощью Phillip Takahashi -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Place the threaded end of the oil filter onto the engine's oil filter threads, being careful to not get dirt or debris on the filter's sealgasket.
[* black] Place the threaded end of the oil filter onto the engine's oil filter threads, being careful to not get dirt or debris on the filter's sealgasket.
[* black] Turn the filter clockwise by hand until it is snug. Tightening the filter should require a moderate amount of your strength, but not all of it.
[* icon_caution] If the filter is difficult to turn at the beginning of its threads, '''stop'''! You may be cross threading the oil filter. Re-align the oil filter and try again.
[* icon_caution] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
[* black] Remove the oil drain pan from under the car.