Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью jamesqb2001 -

Правка отклонена автор Taylor Dixon

До
После
Без изменений

Шаг Линий

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
- [* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.
+ [* icon_caution] Don't insert the opening pick any deeper than 2mm on the side of the display. Inserting the pick deeper than 2mm will damage the backlight assembly, LCD display, or touchscreen.
+ [* icon_caution] Do not use solvents to soften or release the adhesive, as they will enter between the screen layers and cause irreparable damage to the display.