Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью jonathanmorgan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* red] Remove the 7.9 mm T6 Torx screw securing the power supply and hard drive tray to the outer case.
+[* black] When putting the machine back together, make sure to tuck the power wires that run alongside the hard drive in under the power supply, so the hard drive can sit flush against the power supply, not have wires between it and power supply. If you don't, the antenna's screw holes won't line up with those in the hard drive beneath it.