Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Only the screen and digitizer remain.
-[* red] In order to retain Smart Cover compatibility, you must transfer the Sleep Wake sensor from the original display to your new one.
- [* orange] This part is soldered to the lower left corner of the display via six solder pads.
+[* black] Examine your replacement part, and your original display carefully to be sure they match.
+[* red] Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component.
+[* orange] Desolder the six solder pads from the lower left of the display to remove the sensor assembly cable.