Возврат к шагу #12
Отредактированно Philip Le Riche -
Правка одобрена автор Philip Le Riche
- До
- После
- Без изменений
Шаг Линий
| [* red] With the laptop upside down, disconnect the power connector visible in the RAM bay. Turn the laptop right side up again. | |
| [* orange] Disengage 4 connectors from the top of the motherboard: | |
| [* orange] The video connector near the top left. | |
| [* orange] A small connector adjacent to it. | |
| [* orange] A small connector at the bottom right corner of the motherboard | |
| [* orange] The 2nd hard disk bay connector towards the bottom right of the motherboard. | |
| - | [* yellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay. |
| - | [* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit. |