Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Phillip Takahashi -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Place one wrench on a water tank bolt. Hold this wrench steady. Place another wrench onReinstall the corresponding bolt and turnlock nut. Screw it counter-clockwise until the nut is loosedown approximately 1 inch.
[* black] Finish removingInstall a T-handle, screwing it down all the nut and bolt by hand.
[* black] Repeat this process for
way to the remaining three boltslock nut.
[* black] Place one wrench on a water tank bolt. Hold this wrench steady. Place another wrench onReinstall the corresponding bolt and turnlock nut. Screw it counter-clockwise until the nut is loosedown approximately 1 inch.
[* black] Finish removingInstall a T-handle, screwing it down all the nut and bolt by hand.
[* black] Repeat this process for
way to the remaining three boltslock nut.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия