Перейти к основному содержанию

Changes to Step #4

Edit by Phillip Takahashi

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Lift up on the water tank assembly and place a pipe vice below the water tank.
[* black] Secure the pipe vice
T-handle to the pump base with two bolts and tighten the vise onto the pipe.
[* black] Turn the water tank counter-clockwise until it unthreads from the pipe.
[* black] Remove
take pressure of the rod vice.
[* black] LiftRemove the water tank slightly and grip the plunger rod below the water tank with a pair of vice grips. Remove the T-handle by turning it counter-clockwise and holdinglower the vice grips steadyT-handle.
[* black] Lift up on the water tank assembly and place a pipe vice below the water tank.
[* black] Secure the pipe vice
T-handle to the pump base with two bolts and tighten the vise onto the pipe.
[* black] Turn the water tank counter-clockwise until it unthreads from the pipe.
[* black] Remove
take pressure of the rod vice.
[* black] LiftRemove the water tank slightly and grip the plunger rod below the water tank with a pair of vice grips. Remove the T-handle by turning it counter-clockwise and holdinglower the vice grips steadyT-handle.

Image 1

Старая версия

Новая версия

Image 2

Старая версия

Новая версия

Image 3

Удален