Меню

Your Settings

Changes to Step #4

Edit by Dayton —

Правка одобрена автор Dayton

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Lift up on the T-handle to take pressure off the rod viseclamp.
[* black] Remove the rod viseclamp and slowly lower the T-handle.
[* icon_caution] The pump rod will rest on the end cap, located below the cylinder of the pump. It is important to lower the T-handle slowly to prevent damage to the pump.
[* black] Lift up on the T-handle to take pressure off the rod viseclamp.
[* black] Remove the rod viseclamp and slowly lower the T-handle.
[* icon_caution] The pump rod will rest on the end cap, located below the cylinder of the pump. It is important to lower the T-handle slowly to prevent damage to the pump.