Перейти к основному содержанию

Изменения к шагу №3

Отредактированно Javier -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Using two hands (one on the front of the device and the other on the back) apply pressure to the top and bottom seal while pulling the front and back away from each other.
[* icon_note] This may require arequires significant amount of force.
[* icon_note] This may require arequires significant amount of force.
[* orange] The seal is located where the blue plastic meets the black plastic. This is where you will apply pressure.