Skip to main content

Changes to Step #1

Edit by mayer

На одобрении

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two Phillips2.8 mm Phillips screws in the battery compartment near the latch.
[* black] Remove the following 6 screws:
[* red] Two 10 mm T6 Torx screws on either side of the RAM slot.
[* orange] Four 14.5 mm Phillips screws along the hinge.
[* red] Remove the two Phillips2.8 mm Phillips screws in the battery compartment near the latch.
[* black] Remove the following 6 screws:
[* red] Two 10 mm T6 Torx screws on either side of the RAM slot.
[* orange] Four 14.5 mm Phillips screws along the hinge.

Image 2

Deleted