Перейти к основному содержанию

Изменения к шагу №12

Отредактированно Jeff Stephens -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Install the second hard drive assembly into the outer case.
[* black] Be sure that the mounting holes line up with the threaded holes in the outer case as seen in the second picture.
[* black] When the logic board is installed, simply connect the second hard drive cable to the free socket on the logic board.
[* icon_note] The second hard drive cable should lay flat between the two hard drives.