Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Use a spudger to disconnect the inverterisight cable from the logic board by sliding the cable to the left and out of its connector.
[* black] Use a spudger to disconnect the inverterisight cable from the logic board by sliding the cable to the left and out of its connector.
[* black] Disconnect the left fan and left ambient light sensor cables by placing a spudger beneath each cable and lifting up.
[* black] Peel up the left ambient light sensor cable from above the left fan, removing tape as necessary.