Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] Pull up on the suction cup to create a small gap between the display assembly and the rear case.
[* black] Insert the flat end of a spudger into the gap.
+ [* icon_note] The watertight adhesive holding the display in place is very strong, and creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, rock the screen up and down to weaken the adhesive until you can fit a spudger inside.