Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Paige Reisman -

Правка одобрена автор Paige Reisman

До
После
Без изменений

Шаг Линий

[* black] Insert the flat end of the spudger between the front panel and the rear case at the lower left edge of the iPhone.
[* black] Slide the spudger up the left edge of the phone tostarting at the lower edge and moving towards the top cornervolume control buttons and silent switch, breaking up the adhesive holding the display in place.
[* icon_caution] Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.
[* black] Slide the spudger up the left edge of the phone tostarting at the lower edge and moving towards the top cornervolume control buttons and silent switch, breaking up the adhesive holding the display in place.
[* icon_caution] Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.