Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Continue to insertFinish wedging up the upper battery cell using the above procedure by inserting cards along the secondleft edge of the upper battery cellcell (the edge opposite the logic board).
[* icon_note] The adhesive should be getting easiericon_caution] Don't use any cards to break. Ifpry under the battery cell is stubbornly sticking tofrom the top edge of the iPad, do not panic. Simply repeat step 43 through step 53or you may damage the upper case components.
[* black] Continue to insertFinish wedging up the upper battery cell using the above procedure by inserting cards along the secondleft edge of the upper battery cellcell (the edge opposite the logic board).
[* icon_note] The adhesive should be getting easiericon_caution] Don't use any cards to break. Ifpry under the battery cell is stubbornly sticking tofrom the top edge of the iPad, do not panic. Simply repeat step 43 through step 53or you may damage the upper case components.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Удален