Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Richdave -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the faulty EM10 filter. Using tweezers or pliers and a soldering iron works best.
-[* black] Bridge what's left with a small piece of wire or soldering tin.
-[* black] A replacement EM10 filter is available [http://www.logictoyz.com/nintendo-ds/nintendo-ds-lite-spare-parts/ds-lite-em10-filters-.html|HERE] (as at 01/01/12) no doubt Other suppliers exist
+[* icon_note] A replacement EM10 filter is available [http://www.logictoyz.com/nintendo-ds/nintendo-ds-lite-spare-parts/ds-lite-em10-filters-.html|HERE] (as at 01/01/12) no doubt other suppliers exist
+[* black] Solder new EM10 filter into place, ensuring correct orientation. If required, check the new filter with a multimeter to confirm before installing.
+[* red] Alternate method - Bridge the solder pads that correspond with each set of pads - yellow to yellow and cyan to cyan

Изображение 2

Старая версия

Новая версия

Изображение 3

Нет предыдущего изображения

Добавлено