Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #6

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] After teasing the first bit free, we go for gold and take out the entire insectile LED assembly cable.
[* black] Capitalizing on their [guide|3594|existing technology|stepid=17212|new_window=true], Sony chose to use visible light LEDs and the PlayStation Eye camera for position tracking.
[* icon_note] Using visible light means the PS VR will have a harder time competing with ambient light in the room—maybe why Sony doubled up most of the LEDs, increasing the size and brightness of each light on the headset.
[* black] This system is most similar to the [guide|60612|Rift CV1|stepid=126455|new_window=true], with a pattern of light on the headset scanned by a stationary receiver. The [guide|62213|Vive|stepid=130818|new_window=true], on the other hand, uses IR receivers on the headset, reading from a pair of stationary emitters.
[* icon_note] We also note the relative scarcity of LEDs (15 in total) compared to the more than 40 that make up the Rift's IR LED array.