Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* black] Using the sharp end of a spudger, disconnect the connector for the blue and white power cables. Again, be careful to pry up only on the connector.
-[* black] The key is to apply force in two directions, down to keep the surface board connections intact, up to release the connector. It is very easy to break the connector from the board, so be careful.
+[* icon_caution] It is very easy to break the connector from the board, so be careful.
+[* icon_note] The key is to apply force in two directions, down to keep the surface board connections intact, up to release the connector.
[* black] The upper case is now free and can be removed from the computer.