Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Xin Chen -

На одобрении

До
После
Без изменений

Шаг Линий

-[* yellow] Insert the Flat-blade screwdriver into the cutouts of the Lower Housing.
-[* black] Release the two tabs of the Side Housing by lifting the screwdriver in an upward motion
-[* black] Remove the Side Housing.
+[* yellow] Insert the Flat-blade screwdriver into the cutouts of the lower housing.
+[* black] Release the two tabs of the side housing by lifting the screwdriver in an upward motion
+[* black] Remove the side housing.