Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Larry Huang -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] *Disconnect the Panel FFC and CD-R Sensor Cable from connectors CN1 and CN2 on the Switch Board, and release the CD-R Sensor Cable from the tabs of the Upper Housing.
+[* green] *Disconnect the Panel FFC and CD-R Sensor Cable from connectors CN1 and CN2 on the Switch Board, and release the CD-R Sensor Cable from the tabs of the Upper Housing.
[* black] Remove the Upper Housing upwards.