Перейти к основному содержанию

Возврат к шагу #5

Отредактированно jcarm75 -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] There are a total of seven screws that hold the lower case of the DSi together:
[* red] Three are immediately visible without removing any plug or cover.
[* orange] Two plugs near the top of the unit have to be removed to reveal two screws.
[* yellow] Removal of the battery compartment reveals two additional screws that need to be removed.
+ [* black] Front is held together with three tabs as seen in step 6. A shim tool might be required to get it apart. Start from left or right buttons and slide forward until the front tabs pop.