История iPhone 7 Plus Home/Touch ID Sensor Replacement Шага #5

Возврат к шагу #5

Отредактированно Jeff Suovanen - 10 июл 2017 г.

Правка одобрена автор Jeff Suovanen

-	[* ~~black~~] ~~Flip~~ the ~~display assembly over, and apply a [guide\|25705\|warm iOpener] to~~ the home/Touch ID sensor ~~area for about 90 seconds~~.
-	[* ~~icon_note~~] ~~This will help~~ soften the adhesive ~~holding the delicate sensor cable in place~~.
+	[* icon_note] Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
+	[* black] Flip the display assembly over. Use a hairdryer or [guide\|25705\|prepare an iOpener\|new_window=true] and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.