Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_note] Opening the iPod can be challenging. Don't get discouraged if it takes you a few tries before the iPod is opened.
-[* icon_reminder] There are three retaining clips on the right side of the iPod, two retaining clips on the left side, and three retaining clips on the top. The large iPod opening tool will be used to separate the front panel from the metal back of the iPod.
-[* black] Insert the large iPod opening tool into the seam between the front panel and the metal back of the iPod, right above the dock connector. The tool's edge should point towards the metal back case to prevent any accidental scratching of the plastic front.
+[* icon_note] There are three retaining clips on the hold switch side of the rear panel, two retaining clips on the headphone jack side, and three retaining clips on the top. The large iPod opening tool will be used to separate the front case from the rear panel of the iPod.
+[* black] Insert the large iPod opening tool into the seam between the front case and rear panel of the iPod, above the dock connector. The tool's edge should point toward the rear panel to prevent any accidental scratching of the anodized aluminum front case.