Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью Suchiththa Wickremesooriya -

Правка одобрена автор Suchiththa Wickremesooriya

До
После
Без изменений

Шаг Линий

[title] And we're done!
[* black] All is done. You can disconnect other sub-units down a bit more, but it's pretty straightforward. Note the large capacitor connected to the flash. If you If you have a faulty flash you probably need to replace this entire board unit.
[* black] Note the large capacitor connected to the flash. Be '''++VERY++''' careful around this, it can hold a large amount of charge which could discharge into you, if you touch the ends, or into other electronics it comes in touch with.
[* black] All is done. You can disconnect other sub-units down a bit more, but it's pretty straightforward. Note the large capacitor connected to the flash. If you If you have a faulty flash you probably need to replace this entire board unit.
[* black] Note the large capacitor connected to the flash. Be '''++VERY++''' careful around this, it can hold a large amount of charge which could discharge into you, if you touch the ends, or into other electronics it comes in touch with.
[* black] Thanks for reading. This is my very first teardown, and I admit not all the images are great, need to get used to one handed photo taking. Hope this helps someone. I'm guessing most digital camera's of this type will have similar components!