Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

-[* black] Reheat your iOpener and apply it to the upper edge of the display assembly to soften the adhesive holding the front camera and sensor assembly in place.
+[* black] [guide|25705|Reheat your iOpener] and apply it to the upper edge of the display assembly to soften the adhesive holding the front camera and sensor assembly in place.
[* icon_note] Wait about two minutes before moving on to the next step to adequately soften the adhesive.