Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

-[* black] Starting beneath the press connector on the cable, slide an opening pick underneath the front camera and sensor cable.
-[* black] Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel.
+[* black] Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts.