Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Scott Havard -

Правка одобрена автор Scott Havard

До
После
Без изменений

Шаг Линий

-[* black] Use an opening pick to separate the adhesive holding the front-facing camera and sensor cable to the front panel.
+[* black] Use an opening pick to separate the adhesive holding the front camera and sensor cable to the front panel.
[* icon_note] There are two standoffs holding the cable in place. Make sure to pull the cable straight up to avoid damaging it.