Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

Без изменений

Шаг Линий

-[* black] Continue to slide the opening pick to separate the adhesive holding the front camera and sensor cable to the front panel.
- [* icon_note] There are two standoffs holding the cable in place. Make sure to pull the cable straight up to avoid damaging it.
+[* black] Use the pick to lift the camera cable up off of the two plastic posts on the front panel and separate it from the last of the adhesive.