История Power Drill Chuck Replacement Шага #9

Возврат к шагу #9

Отредактированно Thomas Opsomer - 15 дек 2016 г.

Правка одобрена автор Thomas Opsomer

	[title] Fitting a New Chuck
	[* black] If there's no retaining screw and you anticipate forceful counterclockwise action (as when unscrewing), apply a small amount of threadlocking compound to the spindle thread.
	[* black] Use a medium-strength variety, not the kind you'll have to heat with a blowtorch if you need to take off the chuck again at a later stage!
-	[* black] Screw the chuck onto the spindle as far as it will go. You don't need to tighten it with excessive force, it will tighten with normal use.
-	[* black] Insert and tighten the retaining screw if present. If it's damaged, use a fresh one to spare yourself some aggravation down the road. It doesn't hurt to also treat these threads to a dab of threadlocker.
+	[* black] Screw the chuck onto the spindle as far as it will go. You don't need to tighten it with excessive force, it will tighten itself with normal use.
+	[* black] Insert and tighten the retaining screw if present.
+	[* black] Counter-clockwise of course!
+	[* black] If the screw is damaged, use a fresh one to spare yourself some aggravation down the road.
+	[* black] It doesn't hurt to also treat these threads to a dab of threadlocker.