Перейти к основному содержанию

Changes to Step #19

Edit by Phillip Takahashi

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Connect the SATA cable into the SSD.
[* black] Peel the backing off of the double sided tape.
[* black] Carefully set the SSD into iMAC optical bay as far left and down as possible.
[* icon_note] Try not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with it's placement, firmly press down along its edges to ensure full adhesion.
[* black] Re-assemble the iMac in reverse order.
[* icon_note] When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.

Image 1

Нет предыдущего изображения

Добавлено

Image 2

Нет предыдущего изображения

Добавлено

Image 3

Нет предыдущего изображения

Добавлено