Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Dominik Schnabelrauch -

Правка одобрена автор Dominik Schnabelrauch

До
После
Без изменений

Шаг Линий

[title] saddle montage
[* black] useAttaching the saddle to the frame is a pice of cake. Take the saddle and apply assembly paste on saddleto the bottom part of the seat post, around the clamping area of it and inside the seat tube.
[* black] put inSlide the saddle into the seat tube and pullwhile pulling out the wireseat post cable in the lower frame end
[*
of the seat tube.
[* icon_caution] Note the minimum and maximum height markings on the seat post.
[*
black] tighten saddleTighten the bolt of the clamp with the torque wrench and you're good.
[* black] useAttaching the saddle to the frame is a pice of cake. Take the saddle and apply assembly paste on saddleto the bottom part of the seat post, around the clamping area of it and inside the seat tube.
[* black] put inSlide the saddle into the seat tube and pullwhile pulling out the wireseat post cable in the lower frame end
[*
of the seat tube.
[* icon_caution] Note the minimum and maximum height markings on the seat post.
[*
black] tighten saddleTighten the bolt of the clamp with the torque wrench and you're good.