Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Dominik Schnabelrauch -

Правка одобрена автор Dominik Schnabelrauch

До
После
Без изменений

Шаг Линий

[title] Saddle montage
[* black] Attaching the saddle to the frame is a piece of cake. Take the saddle and apply assembly paste to the bottom part of the seat post, around the clamping area of it and inside the seat tube.
[* black] Slide the saddle into the seat tube while pulling out the cable at the lower end of the tube.
[* icon_caution] Note the minimum and maximum height markings on the seat post.
[*[* black] Tighten the bolt of the clamp with the torque wrench and you're goodwrench.
[*[* black] Tighten the bolt of the clamp with the torque wrench and you're goodwrench.