Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #5

Редактировать с помощью Dominik Schnabelrauch -

Правка одобрена автор Dominik Schnabelrauch

До
После
Без изменений

Шаг Линий

[title] saddle montage
[* black] looseLoosen all screws of the hangers along the frame thatwhich hold the wiresaddle cable.
[* black] bringBring the front end with the switch to the bar by pulling it through the hangers along the frame. Take care of the other cables around your bar.
[* black] Position the switch on the right side of your bar and tighten screwsit's screw loosely. Afterwards bring it into a comfortable position for your riding stance and tighten its bolt with the torque wrench to 5-6 Nm.
[* black] looseLoosen all screws of the hangers along the frame thatwhich hold the wiresaddle cable.
[* black] bringBring the front end with the switch to the bar by pulling it through the hangers along the frame. Take care of the other cables around your bar.
[* black] Position the switch on the right side of your bar and tighten screwsit's screw loosely. Afterwards bring it into a comfortable position for your riding stance and tighten its bolt with the torque wrench to 5-6 Nm.