Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.
-[* icon_caution] Be sure you are prying up on the hinged retaining flap (side opposite of where the cable enters), ***not*** the socket itself.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap (on the side opposite the cable), ***not*** the socket itself.
[* black] Pull the trackpad ribbon cable straight out of its socket toward the rear edge of the Air.