Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] Remove the 1.4 mm PhillipsT5 Torx set screw from its tapped hole near the front edge of the upper case.
[* red] Remove the 1.4 mm PhillipsT5 Torx set screw from its tapped hole near the front edge of the upper case.
[* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.