Перейти к основному содержанию

Changes to Step #4

Edit by Jacob

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Fold the circuit board back like a book cover just as you did with the back plate.
[* red] Be careful of this connector which goes to the front of the phone.
[* icon_caution] Unlike the connector in the previous step, this one should not be removed unless you plan to replace the logic boardmotherboard!
[* blue] The silver contacts on the bottom of the logic board are what recognize key presses; if the phone isn't responding to key presses, you will need to replace the logic boardmotherboard here.
[* icon_caution] Unlike the connector in the previous step, this one should not be removed unless you plan to replace the logic boardmotherboard!
[* blue] The silver contacts on the bottom of the logic board are what recognize key presses; if the phone isn't responding to key presses, you will need to replace the logic boardmotherboard here.