Возврат к шагу #8
Редактировать с помощью Christopher Bedford -
Правка одобрена автор Miroslav Djuric
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove hard drive by carefully pulling to the left by the black plastic ribbon attached to the drive encasing, then ease up on the left and out. [* black] Be careful when re-inserting that the WiFi antenna cable (visible as a black loop below the disk in the 2nd photo) is not trapped under the leg of the drive encasing. |
| [* black] Remove hard drive by carefully pulling to the left by the black plastic ribbon attached to the drive encasing, then ease up on the left and out. [* black] Be careful when re-inserting that the WiFi antenna cable (visible as a black loop below the disk in the 2nd photo) is not trapped under the leg of the drive encasing. |